Gas Anaesthesia Apparatus, Components & Accessories

We Manufacture & Exports Change Over Unit , which are used in Aneasthesia gas Apparatus.
The Features of change over unit are given below.
Features
Change Over Unit is normally positioned at the top of the apparatus table. It has a built in emergency oxygen push button and change over facility from open to closed circuit and vice versa. {short description of image}

Emergency Oxygen Unit is an important accessory used in Gas Aneasthesia Equipments.
It incorporates a non-return valves assembly along with a button for flushing the circuit with oxygen

Features
Emergency Oxygen Unit Incorporates a non-return valves assembly along with a button for flushing the circuit with oxygen in emergencies.

We Manufacture & Exports O2Failure Alarm - for Gas used in Anaesthesia Apparatus.
This is a battery operated controlled device which is used in analysing oxygen pressure .
Features
Nitrous Oxide
A battery operated pnuematically controlled device which activates an audio alarm for about fifteen seconds when oxygen pressure in the system falls to approximately 4.2kg/cm2

Goldman Halothane Vaporizer - w/o stand vaporizers consist of a vaporizing chamber, usually a glass bowl or bottle, containing liquid anesthetic and a tap controlling the proportion of gas flowing through it .

Features
Drawover type, designed to limit the maximum concentration of Halothane vapour to 3% by volume irrespective of the total gas flow through the unit. Adjustment is made by means of a ratchet type control valve. The glass jar is screwed on to the body and can be quickly detached for easy filling. The vaporizer is also suitable for use with Trichloroethylene in low concentrations.

We are Manufacturers & Exporters of Non Return Valve Assembly , which is used to avoid & minimising the risk of back flow of gases.
Features
Non Return Valve Assembly Blows off when pressure exeeds 200cms of water column thus minimising the risk of back flow of gases.

Heidbrink Expiratory Valves - 15mm E/T straight connectors can be fitted at the patient end, thus avoid using catheter mount & reducing dead space. Will not bend or dent when accidentally dropped.

Features
22M/15F at patient end & 22F at distal end.
23M/15F at patient end & 23F at distal end.
23M/23F Brass Chromed
A variable tension spring is fitted in the above three expiratory valves to control the degree of rebreathing

We are Manufacturers & Exporters of 22 Angle “Wye” w/o Expiratory Valve which is used in Expiratory system .
The patient end accepts anaesthesia mask & 15mm tracheal connector.

Dr. Nawathe’s Swivel with Expiratory Valve comes under the category of Expiratory Valves .
It is connected with anaesthesia mask & 15mm tracheal connector to provide best results.

Features
In Dr. Nawathe’s Swivel with Expiratory Valve , Patient end accepts anaesthesia mask & 15mm tracheal connector. Low weight - 50gms - leads to minimization of the pressure strain for patient. Sturdy to withstand rough usage, will not bend or dent when accidentally dropped, needs no servicing with absence of circlips & rubber washers.

We are Manufacturers & Exporters of Bag Mounts , which will not bend or dent when accidentally dropped.
The features are given below .
Features
22F x 22M & 22F at Bag end - Plastic.
23M x 23F & 22 F at Bag end - Plastic.
23M x 23F & 23 M at Bag end with ON/OFF Lever - Brass chromed.